I took pictures of my fan dipole while I had it down for maintenance this weekend. Thought I'd share.
Eventually, I plan to add 40 meters. At this time, have 80 & 20.
When I get around to adding 40, I will upgrade the feed point.
Probably to use nuts and bolts to help with strain relief, and to add a bit better mechanical connection.
When I put this one together, I kinda made it up as I went.
The last image is a picture I found when looking at what others had done at the feed point for strain relief.
I may also terminate the coax inside a capped section of PVC to shed water away
from the joint where the coax meets the antenna elements.
I've seen a few examples of this, but generally with separate eye bolts for each wire in the fan dipole to help spread them out.
My antenna has a common feed point for both/all bands.